28 Feb

Mistakes to Avoid When Sealing Asphalt Driveways

A lot of homeowners prefer asphalt driveways over concrete pavement these days. This is because there are several advantages associated with this type of driveway. However, your investment can only go as far as you know how to maintain it. You should therefore put a lot of thought into preserving your asphalt driveway for as long as possible. One way to do that is by sealing it.
Asphalt Driveways

When sealing your asphalt driveways, you need to hire professional contractors that offer commercial asphalt services. This is the only way you can be sure to avoid these common mistakes during the sealing process:

Mistake #1: Putting Too Many Layers of Sealer

This tops the list of common mistakes associated with sealing an asphalt driveway. For those who do not know the proper way to seal an asphalt driveway, the idea is that as long as you apply a thick layer of sealer, you can prevent damage on the actual surface of the driveway. But a thin layer will get the job done equally fine as a thicker layer would. Hence, there is absolutely no reason to add more layers than you need to. A qualified contractor providing services on asphalt Melbourne has today will know exactly the right amount of sealer needed to give your driveway protection.

Mistake #2: Not Re-Sealing

The sealer will wash off after some time since the first time you apply it. Hence, you have to re-apply it again. From its first application, you need to apply a new layer of sealer after 6 months. After that, a yearly application should be good enough to keep your driveway in tip-top condition. But if you live in an area wherein the weather condition can be harsh, especially during winter, you have to pay closer attention as to when it might be in need of re-sealing.

Mistake #3: Not Protecting Yourself When Sealing

Sealers used on asphalt driveways are made of chemicals that can be harmful when it comes into contact with the skin. Therefore, you need to use protective gear such as gloves when applying it to your driveway. It is also recommended that you use a facial mask since inhaling the sealer can be hazardous to your health. However, you won’t have to go through this much trouble when you hire professional contractors to manage your driveway. They know the proper methods to apply the sealer and what gear to use to protect themselves.

Mistake #4: Not Removing Dirt or Stains

You should not skip the cleaning process before sealing your driveway. Make sure there are no dirt or stains on the surface before you apply the sealer. To make your life easy, you can use a pressure washer for a more effective cleaning process.

Mistake #5: Not Mixing The Sealer Properly

Before you apply the sealer onto the driveway, you have to make sure that it is well mixed. Turn the can upside down in order to pre-mix the content prior to opening it. When the sealer is properly mixed, it will apply easily and more evenly.
Remember these tips when sealing your driveway, or find a professional contractor to do it for you! These professionals can do a better and more efficient job in maintaining your driveway!


Leave a Reply

Your email address will not be published. Required fields are marked *