28 Feb

Choosing the right deck screws

Decks tend to collapse more times than one can imagine. Brad G, Lexington, KY says that a deck collapsed near his home some time ago, and people were seriously injured. The reason for the collapse was attributed to the use of corroded nails as they were not able to hold the weight. Apparently, people assume that nails will do just fine when building decks as they are used to frame houses which can stand for a century and more when nailed together. However, unlike houses, decks get wet on a regular basis and dry out. Thus, nails won’t guarantee a safe and stable deck. This cycle of wet and dry on decks results to decks losing their holding power. So what should one use to make decks? Do deck screws work better than nails and how do you choose the right one? This article explains more about choosing the right decking screws for you.

deck screws

What are deck screws?

Deck screws are specialized fasteners that are designed to resist corrosion in adverse outdoor environmental conditions. Their design and style makes them drive easily into deck boards and after they are set, they should lay on the deck surface smoothly; this is referred to as counter sinking. These unique characteristics are important for the screws to accommodate the challenges of withstanding weather conditions as wood decks tend to have a lot of thin planks.

Corrosion protection

The first factor to check as you purchase your deck screws is adequate corrosion protection. This is because without protection the atmospheric corrosion with time affects the performance of the screws. This corrosion is easily caused by pollutants and salinity in the air combined with moisture; especially in the industrial and coastal areas. More information brand name: Trade Warehouse

Standards

There may be many types and brands of deck screws, but it is important to get the ones that are up to standards for your safety and long standing of your deck. In Australia, you will discover that deck screws are rated according to AS3566.2 self drilling screws, which are popular among industries for construction and building. Therefore, as you purchase your decking screws, ensure that they meet the standards as specified in the AS3566.2, 3 or 4 which is determined by the environment you are in. These standards mainly point out the level of corrosion protection that is appropriate and this mostly differs with cost and the lifetime requirements of the screws.

Types of stainless steel decking screws

They are known to look nicer than the coated ones. In addition they can be used for all types for hardwoods and softwoods. They are also resistant to corrosion due to the stainless steel and the outer coating is designed to automatically redistribute when the surface is scratched, protecting the inner layer. This stainless steel screw has various grades which include 304 grade and 316 grade among others, which have different strengths making them better for decks in different areas. For more specifications about stainless steel screws online, visit https://tradewarehouse.com.au/304-grade-stainless-steel-decking-screws.html

Choosing the right deck material increases its strength and life expectancy.



28 Feb

Mistakes to Avoid When Sealing Asphalt Driveways

A lot of homeowners prefer asphalt driveways over concrete pavement these days. This is because there are several advantages associated with this type of driveway. However, your investment can only go as far as you know how to maintain it. You should therefore put a lot of thought into preserving your asphalt driveway for as long as possible. One way to do that is by sealing it.
Asphalt Driveways

When sealing your asphalt driveways, you need to hire professional contractors that offer commercial asphalt services. This is the only way you can be sure to avoid these common mistakes during the sealing process:

Mistake #1: Putting Too Many Layers of Sealer

This tops the list of common mistakes associated with sealing an asphalt driveway. For those who do not know the proper way to seal an asphalt driveway, the idea is that as long as you apply a thick layer of sealer, you can prevent damage on the actual surface of the driveway. But a thin layer will get the job done equally fine as a thicker layer would. Hence, there is absolutely no reason to add more layers than you need to. A qualified contractor providing services on asphalt Melbourne has today will know exactly the right amount of sealer needed to give your driveway protection.

Mistake #2: Not Re-Sealing

The sealer will wash off after some time since the first time you apply it. Hence, you have to re-apply it again. From its first application, you need to apply a new layer of sealer after 6 months. After that, a yearly application should be good enough to keep your driveway in tip-top condition. But if you live in an area wherein the weather condition can be harsh, especially during winter, you have to pay closer attention as to when it might be in need of re-sealing.

Mistake #3: Not Protecting Yourself When Sealing

Sealers used on asphalt driveways are made of chemicals that can be harmful when it comes into contact with the skin. Therefore, you need to use protective gear such as gloves when applying it to your driveway. It is also recommended that you use a facial mask since inhaling the sealer can be hazardous to your health. However, you won’t have to go through this much trouble when you hire professional contractors to manage your driveway. They know the proper methods to apply the sealer and what gear to use to protect themselves.

Mistake #4: Not Removing Dirt or Stains

You should not skip the cleaning process before sealing your driveway. Make sure there are no dirt or stains on the surface before you apply the sealer. To make your life easy, you can use a pressure washer for a more effective cleaning process.

Mistake #5: Not Mixing The Sealer Properly

Before you apply the sealer onto the driveway, you have to make sure that it is well mixed. Turn the can upside down in order to pre-mix the content prior to opening it. When the sealer is properly mixed, it will apply easily and more evenly.
Remember these tips when sealing your driveway, or find a professional contractor to do it for you! These professionals can do a better and more efficient job in maintaining your driveway!



27 Feb

Affordable Bitumen/Asphalt Driveways by Leaders in Asphalting

Replacing, repairing, repaving or putting in a new driveway is a necessity. Sadly, it is not cheap. Though it is simply a flat but long stretch of asphalt or bitumen, preparing the foundation for it makes it expensive. Bitumen is what binds an asphalt together. Thus, we may call an asphalt driveway a bitumen driveway. Nowadays, it is advisable to have bitumen driveways. Why?
* It is cheaper than concrete.
* It dries faster.
* It’s recyclable. It’s melted again and again.
* It is easy to repair. Not only can bitumen or asphalt be put on top of the old one, you can just repair a part of it.
* It is vehicle friendly because it has a good skid resistance.
To patch, refinish or replace your driveway?
Again, it’s not cheap doing anything with regards to a driveway. No wonder many just patch up bad spots. Unfortunately, sometimes, this isn’t what your driveway needs.
– For small cracks, less than a quarter-inch wide, driveway patching using liquid crack-fillers would be okay. If cracks are larger than a quarter-inch wide or are few inches deep, your driveway needs replacement. Patching could give you a few years but don’t expect an ideal-looking driveway.
– Twenty-year-old driveways need a complete redo. A driveway this old withstood many years in the elements. Patching would do nothing because new issues would come up way before you finish patching.
– If you’re trying to sell the house, buyers might be turned off with a cracked or pitted driveway.
– Consider driveway resurfacing. Asphalt paving services Melbourne professionals can just resurface your driveway. This means they just take off the top layer and replace it. At a lower price, you get a completely new look. Cracks and pits you’re covering won’t return for a while.
Qualifications of asphalting contractors
Bitumen driveways are not only cheaper but they won’t crack easily. By now, it is obvious what your choice is. So you can just check while work in your driveway is ongoing, be careful in selecting competent and reputable driveway asphalting Melbourne contractors who would do the work in a competitively affordable price.
1. They are in the phone book, have job pictures, insurance certificate, can give a warranty and has testimonials in their website.
2. Ask how they train their employees.
3. Their sales people have clear options in repairs.
3. Customer service – how they communicate with you.
4. Years in business – expect them as your go-to for anything asphalt. They do: asphalt driveways, asphalt rural driveways, asphalt repairs, asphalt carparks, asphalt school yards, asphalt resurfacing and asphalt paving.
5. Value-added services – what you can expect before and after the job.
6. Can give a written contract even upon request. If possible, hold on to a part of the payment until you are happy with their work.
Nelson Asphalting delivers high quality results that customers trust them with. With over 12 years of asphalting work under their name, they also professionally design and construct driveways that raise the value of homeowners’ property.
Find out more about these leaders in asphalting and bitumen driveways in http://www.asphaltmelbourne.com.au/asphalt-driveways-melbourne

23 Feb

7 Ideas to Incorporate Into Your 2017 Home Renovations Project

If you want to give your home a re-do this 2017, you have come to the right place. But while it is exciting to work with contractors specializing on house renovations Sydney has to offer, it can be costly and will require a lot of planning. The decision to renovate is the easy part – the hard part is what will follow next. One of the biggest problems homeowners face is devising ideas that they can incorporate into the renovation project.

If you are out of ideas yourself, here are a few ones that you can incorporate and share with your contractor tasked to do house renovations Sydney has today:

Go Matte

This particular home design and renovation idea for 2017 is specifically focused on the kitchen. Brushed metal or the industrialized look might not be as big in 2017 as it was in the past years. A matte finish is the new “in” trend for this new year. A surface sheen tends to distract you as far as design is concerned. Hence, a matte finish is the best choice for homeowners, especially for those aiming for a modern minimalist look.

Go Eco-Friendly

In case you didn’t know, eco-friendly is in! The drive to go green has been teasing homeowners for a while but this is the year to take it to the next step. Opting for eco-friendly renovations in your home has plenty of benefits too. For example, you can reduce the energy consumption and also contribute to the global environmental preservation in your own little way.

Marble Is In

No, marble isn’t just popular for flatlays or on Pinterest. It is cited by experts are one of the top home décor trends for 2017 too. From tiles to wall covering and carpets, marble is going to be seen a lot this year!

Chrome Fixtures in the Bathroom

The use of chrome bathroom fixtures can be a simple way to make your bathroom look professionally designed. When you decide to use chrome water fixtures, though, you must be prepared to allot a budget for it (chrome water fixtures can be expensive). However, the expense pays for it in the long run since chrome is known for its durability. You can therefore make your investment last for several years while adding to the aesthetic beauty in your bathroom.

Cerused Wood Finish

If you need to do a major house renovation, such as changing your flooring, you can opt for the cerused wood finish. This technique is characterized by exposing the unique grain of the wood. It has been around in the high end market for a long time now. However, it is ready to break into the home décor scene this year. It looks great on cabinets, tables and chairs.

Subway Tiles

If you’re not willing to splurge on marble tiles for your kitchen and countertop, this is a good alternative. Subway tiles add that rustic element to your home design, especially in your kitchen. It is also quite affordable while scoring big on the style point.

Update Doors and Windows

When getting contractors to do house renovations Sydney has today, you can give your home a new look by updating the windows and doors. You can do this for energy-efficiency and added security, while also changing up the decorative value of your home in the process. With the right contractor, you will be able to achieve your goal! Visit website http://www.sbsbuilding.com.au/



23 Feb

Pool Restoration: Pool Makeover Dos for Starters

Pools are really nice. You can either relax or work your way to Olympics in a swimming pool. But the problem is, pools need a lot of maintenance which can be costly. And sometimes, if you leave it be for a year or so, it’ll look like an entire swamp full of hidden, magical dwarfs with its molds and probably some lily pads. Looking at your aged, discolored pool can be really frustrating, especially if you left it unattended. So, people from all over the internet are posting their DIY projects on how to restore a pool. But the thing is, not everybody has the means of cleaning and restoring a 20 x 40 sized pool. Instead, people just contact experts in pool restoration Perth or one’s city has right now.

pool restoration perth

Below are some tips to do if you’re thinking about giving your pool a makeover:

1. Give your pool a full body check up

Check the areas you think your pool needs utmost attention; check your pool system. Make a list of them and make sure you separate the things you need to get fixed and things you want fixed (there’s a big difference between the two). You don’t want to start making a list when the experts in pool restoration in Perth arrive at your doorstep.

2. Look for good companies

Good pool builders do not necessarily mean that they are also experts in restoring one. Perth pool restoration services are quite pricey so make sure you find the right people to do the job. Look at their job history and consider your neighbors’ recommendations. Many services for pool restoration Perth has today are topnotch but you still have to narrow down your choices for best results.

3. Find out how much it would cost

Now this is a kind of an elimination process on your side. Since you already have the list of things you want repaired, you have to make inquiries about your list and ask for an estimation of how much would it cost. You have to call a few companies for your inquiries. It’s not easy looking for cheap pool restoration in Perth so you’ve got to have patience in doing so, if you want to save money. Also make sure that the price you pay does not compromise the quality. More information brand name: West Coast Pool Resurfacing

4. Provide them information

This is important. Let them know the specs of your pool. That way they can give your pool the proper care and the restoration it needs. For instance, if you have a fiber glass pool, let them know. There might be things you cannot do with a fiber glass pool.

5. Ask for tips

One of the good things you can get from calling experts is that you can ask for tips, unlike DIYs. Good pool restoration Perth has right now will be able to give you information of how you should take extra care of your pool. Make sure you take note of them. Instructions from the internet are a lot different than the instructions coming from an expert since you can tell them some specific issues you have with your pool.

For inquiries about pool restorations, you can visit: http://westcoastpoolresurfacing.com.au/


23 Feb

As parents, raising kids is quite the adventure. Video games are very popular with kids today; there’s a big chance that you’ve seen your kids play first-person shooting games on their gaming consoles or personal computers. Oftentimes, parents can worry about their kids when they spend too much time inside their rooms playing video games. As parents, what can you do to make ends meet? How can you get your kids to play outdoors physically while enjoying the kind of games they love? Laser tag games are the perfect mix of shooting games while getting your kids active. Here are some great reasons and benefits for getting the whole family to visit a trendy new laser tag arena design game store today for your bonding activity:

laser tag arena design

What is laser tag?

Similar to a video game’s rules, laser tag is an interactive competitive shooting game where the players roam around a laser tag arena design strategically made and try to “shoot” at members’ sensors of the opposing team using laser guns that emit lasers. Greater teamwork efforts and complex game tactics are allowed with the use of high-tech laser tag equipment that works at longer ranges around the multifarious laser tag arena design. Unlike the similar games of paintball and airsoft, laser tag is much safer and family-friendly since the laser from the equipment is completely harmless.

Reasons to go on a fun laser tag game with the whole family:

1. You and your family can play laser tag both indoors and outdoors. Depending on the weather of the day, laser tag arenas are available today with flexible options. If you want a cooler environment for playing, a laser tag arena with many different designs indoors can be an option. But if you want you and your family to sweat it out under the sun, some laser tag equipment can also be used outdoors.

2. Aside from being very entertaining, laser tag is completely safe with equipment that promotes safe game playing. The laser guns actually fire a harmless infrared laser beam that hits the sensor vest equipment worn by the other players.

3. Being an interactive and social game in nature, taking your family to a laser tag arena to bond with will encourage them to be more confident and sociable. If you just take your kids to a laser tag game joint, they will be encouraged to make more friends that they meet on the game, too.

4. A game of laser tag is also a perfect birthday party activity. You can provide you child and his friends a fun opportunity to work as a team towards a common goal. Fostering the value of friendship and teamwork can prevent your kid from becoming selfish and encouraged to think critically to solve problems to win the game. Click here Creative Works Australia

5. Moving around, jumping, running, hiding, and dodging are the common tactics involved for winning a game of laser tag. This means laser tag games are the best way to get your kids to exercise.

6. Thinking of and planning some critical techniques to win the game of laser tag encourages your kids to train their mind.

7. Like the adage goes, leaders are made, not born. Laser tag instills leadership abilities in your kids while having fun.


21 Feb

Techniques of Controlling/Preventing Soil Erosion

Soil erosion can be defined as the displacement of soil particles by either wind, water or animals. This process can easy turn a rich, fertile, and healthy soil into an arid and infertile soil. In most cases, soil erosion usually occurs at construction sites, on farms, which lack inappropriate structure and soils that have too loose owing to continuous use for a long time. Once the soil has been eroded, it becomes extremely hard to grow crops or vegetation on it. Therefore, it is important to put in place the recommended techniques and methods of controlling soil erosion. There are various soil erosion control measures and method that are used to control soil displacement. These methods include:

Planting vegetation on loose soils

This is the most natural and effective method of controlling soil erosion. Once appropriate vegetable have been planted, their roots usually go deep in the oil hence binding the soil particles together. Vegetable therefore helps to grip soil together preventing excess movement of soil. Many people prefer planting trees and vegetation as one of the suitable erosion control measure/practice.

Construction of Silt fence

Building silt fences is another useful technique, which is used to control soil erosion. Silt fences are usually constructed on loose soil. It requires special techniques during construction. For instance, these fetches are not secured completely on the ground, and this gives room for water to pass right underneath the barrier. Whenever planning to construct silt fences, it becomes advisable to hire contractors who have enough skills or knowledge in silt fence construction. Loaders and excavators, bobcat hire Melbourne has nowadays can be used to help in transporting and excavation of the construction site.

Matting method/technique

A matting method involves laying of a mat like material on loose soils. The mat ought to cover the soil until natural/native vegetation starts to grow. It has no effects or harm to the vegetation, and thus, it is recommended for use as one of the suitable soil erosion control methods. These mats are believed to provide strength and enough surface area, which is required to prevent a given piece of land from water runoff/erosion.

Planning for shore restoration projects

It is one way to restore those shorelines that have been damaged by soil erosion. Undertaking this process helps to increase natural stability and strength of soils, which are along water bodies. Since rocks and sand will be needed in large amounts during this exercise, it is advisable to consider services offered by tip truck hire Melbourne has today for assistance especially in transporting heavy materials to the construction site.

Digging contour trenches

Contour trenches are structures that are dug the counter of a hilly area to run perpendicular to the water flow. The main role played by these structures is to catch rain water hence preventing it from washing the loose soil. This method is mostly used by farmers who grow crop and vegetable. Once these trenches have been dug, water runoff is usually minimized, and it becomes hard for water to wash away planted seeds. Moreover, gabion construction is another suitable method of controlling soil erosion. The technique is mostly used to prevent erosion, to know more about it, you can visit the link at http://www.stateplanthire.com.au/erosion-control-specialists/


21 Feb

Tips on Sealing Your Asphalt Driveways in Melbourne

Your asphalt driveways will undergo a deterioration due to a number of factors such as UV rays from the sun, too much heat  or even salt on the driveways. There are, however, some excellent ways through which you can protect the asphalt driveways Melbourne homeowners currently have like sealing of the driveways, carrying out regular maintenance work as well as the protection of the driveways.

Asphalt Driveways Melbourne

Making Preparations for Driveway Sealing

There are various products that asphalt contractors can use in order carry out professional sealing of the driveways such as a no-mix driveway sealer.  It is important to gain sufficient information about the product before you buy it. The asphalt sealers used on the driveways will cure within only a few hours and the driveway will be ready for use in less than 48 hours.

When sealing the asphalt driveways Melbourne clients install, it is important to ensure that the ambient temperature is a minimum of 60F or more before you apply the sealer and after applying the sealer. In case it is raining or about to rain, do not apply the sealer as this will interfere with the curing process for the driveway.

If you live in a location that has lots of fog or morning dew, it is important to stop the coating process for the asphalt driveways Melbourne has to offer before 3 pm. This will prevent the sealer from washing off the driveway surface. For the best outcomes of the asphalt coating, it is important to apply two thin coats instead of a single thick coat. If there are repairs on the driveway surface such as cracks or potholes, it is important to allow for up to 6 months for curing before applying the asphalt sealer.

Applying the Sealer

Unless you have experience and expertise in paving work, it is important to entrust this to a professional commercial asphalt services Melbourne has to offer. The coverage of the sealer will be affected by how permeable the surface is. Typically, a pail of asphalt driveway surface will cover anywhere from 300ft to 350ft. It is, therefore, important to carry out proper measurements when you are planning to make purchases for your sealers.

Clean the Surface

Before applying the sealer, carry out a thorough surface cleaning  to clear off all the dirt and debris from the pavement surface. Trim any shrubs along the pavement and edge the areas along the turf.

Any surfaces which you do not want to seal should be taped off. These can include surfaces such as gutters, concrete and brick. In order to get a clean sealer application on the asphalt driveway, you can apply the sealer material with a dry brush.

Once you have made these preparations, the sealer is poured from one end of the pavement to the other. The sealer is subsequently spread this with the use of a squeegee tool into a very thin layer. You can apply second layer perpendicular to the first layer of sealer material. The two coats must overlap and ensure the surface is fully covered with the sealer material.

Installations of asphalt driveway Melbourne builders recommend cost a lot of money and it is important to take adequate measures in order to ensure maximum protection of these surfaces. When planning your asphalt driveway sealing, it is always important to make advance planning for smooth results.


21 Feb

5 Reasons to Get a Freestanding Bath

Are you planning a bathroom redesign? If yes, you need to consider investing in a freestanding bath Brisbane has today. It is a true investment to give your bathroom that modern and luxurious feel. When it comes to style statement, a freestanding bath definitely delivers. But what other reasons are there to invest in one?

It Creates the Illusion of Space

The shape and the freestanding quality to the bath creates the idea of having more space in your bathroom (than it already does). This is because the bath is detached from a wall or some other parts of the bathroom. Plus, there is room underneath and you have to arrange it somewhere with an open area.

Lots of Design Options

When you shop around for freestanding bath Brisbane has today, you will be overwhelmed with just how many options there are. The options vary in terms of material and the design. If you want to invest in this type of bath for its style value, you have to consider the design of the bath you choose. There are some baths that are shaped like a traditional bathtub would while others have curved edges for some flair. Meanwhile, there are a few others with a symmetrical shape to them to give that modern, edgy look. You have many options so choose one that fits best into your bathroom décor and personal style.

Whatever you choose, make sure that the design supports the natural angles and curves of your body. Do not get too consumed with style and aesthetics that you forget this product is designed primarily to provide a relaxing bathing experience.

Showcase Your Tiles

A stone resin bath is the most common choice available in the market today. This is also your best option if you want to showcase your bathroom tiles. Opting for an all-white finish to your bathroom gives it a clean and elegant feel to it. This also enables the pattern from the floor to the walls and to your bath to flow freely and uninterrupted.

Add Elegance to the Bathroom

As mentioned earlier, there is a certain elegance to a freestanding bath. Since there are several style and design options to choose from, you can up that elegant factor. For example, some freestanding baths have chrome or aluminum stands or feet. This type of finish helps to elevate the bath from the floor slightly while also giving it that elegant touch to it. See more at Builders World

Vintage Look

It is undeniable that investing in a freestanding bath will give your bathroom a vintage look and feel. There was a time when freestanding baths were the norm until new bathroom designs were introduced. This retro element to your bathroom design is definitely going to make it stand out.

A freestanding bath Brisbane has to offer makes other elements in your bathroom décor stand out. At the same time, it adds a touch of elegance to it. There are certain pro’s and con’s associated with it especially when it comes to space and practicality. But once you have determined that you can work it into your bathroom, the conditions above will certainly give you more bang for your buck with this investment. Go to http://buildersworld.com.au/bath/free-standing to find a freestanding bath that would suit your bathroom style.


7 Dec

New Homes Construction and Rebuilding Better Homes

Are you planning to build a new home for yourselves? Have you located the plot but yet to select the construction company? Or are you just trying to demolish an existing structure and reconstructing it all over? You could get any of these if you got hold of the agency that has the expertise in building new home designs and is able to make a solid offer for building your residential unit.

Home Designs
Make a Huge Difference Many times, it is the architect that could make the difference between a good house and an ordinary residence. The home designsare usually overlooked by most people while building new homes. It is true that when the plot size itself is not large then it leaves very little room, literally for the designer to come up with many different plans. If the living room, kitchen and bathroom are a given, then you can either play around with their sizes and that of the bedrooms or just place them in different layouts. But a duplex builder is able to come up with some innovative and space saving ideas and there are 2 different sets of occupants in the duplex type apartments or houses in Melbourne or elsewhere in Australia.

But irrespective of all this, one is always looking at some newer ideas, latest materials of construction and so on. You would want better security, a more relaxed ambience and a highly functional residence. These will ensure that you face very little difficulty living in the place you got built to live in. There are Melbourne builders, who undertake to design and build your home and make life in the home built by them comfortable forever.

Reconstruction Also a Choice On the other hand, your proposal involves a knock down rebuild process; the construction company will be able to handle that as well. There are many reasons why people prefer to go this route. The first one obviously would be that the building is old enough and needs serious repair work. There are also other reasons. One of them could be that you might be used to the area and the neighbourhood and don’t want to get away. From an entirely another perspective, you could demolish and reconstruct as if one is building a new home and gain a lot on energy saving. This is because the modern building techniques permit the builder to change improve things around your home and make it a property that you will live in and enjoy. Thus, it gives you the best of both worlds.

So whether new homes are being built or existing ones are being razed to the ground, and an all new home is being built on the site, the agency that takes up the contract for building is required to be good at planning and execution and have all the experts, in-house. Each location will have a number of local building by-laws which the builder has to adhere to and again, the experience and knowledge of local conditions are very useful for the house builders Melbourne market has today to be entrusted with the responsibility.

For more information on home builders Victoria has today, you can visit their website.